The World’s #1 Structural Design and Detailing Software
Get your quote today.
The World’s #1 Structural Design and Detailing Software
Get your quote today.
Subscription Options
Contact our Sales Team for more info
20% off offer valid for new customers and existing customers expanding seat count, not valid on renewals.
Tekla Carbon
For Viewing and Collaboration
From $1,800
AUD/yr + GST
View models and access shared project data for easy collaboration using Tekla Model Sharing and Trimble Connect.
Best for: Project managers, site teams & stakeholders
Tekla Graphite
For Modelling and Coordination
From $5,800
AUD/yr + GST
Model, coordinate, and detect clashes to streamline project workflows.
Best for: Coordinators, Consultants & BIM teams.
Tekla Diamond
For Advanced Modelling & Design
From $10,500
AUD/yr + GST
Full modelling, detailing, and design capabilities with advanced automation tools.
Best for: Engineers, Detailers & Fabricators.
Tekla Tedds
Automated structural calculations
From $2,000
AUD/yr + GST
Easy, accurate structural design and calculation software.
Best for: Structural engineers needing fast, reliable design documentation.
Tekla PowerFab
For Steel Fabrication Management
From $7,400
AUD/yr + GST
Connects estimating, purchasing, production, and logistics into one streamlined, real-time system.
Best for: Steel Fabricators, Production Managers, and Project Controllers.
50% OFF E-LEARNING
Tekla Structures for Engineers
Basic Modelling and GA’s only (Aus)
12 Weeks of Course Access
SAVE 50%
$1,000
Tutorial 1
– Create new model
– Create grids
– Create model views
– Point creation
– Model footings
– Model columns
– Model beams
– Member offset and rotations
– Add baseplate, endplate, shear plate connections
– Copying members
Tutorial 2
– Set out and connect portal frame
– Model wall bracing
– Work with workplanes
– Create true plan views
– Model roof bracing
– Add bracing connections
– Model purlins
– Add purlin connections
– Add bridging
Tutorial 3
– Work across multiple 3D views
– Model holes manually
– Use contour plate tool (hopper walls)
– Use beam tool (hopper flange)
– Welding
Tutorial 4
– Construct angled points for stair setout
– Model PFC stair stringers and toeing direction
– Mitre joints
– Line Cut and Fitting tools
– Folded plate tread using Polybeam
– Polybeam corner chamfers
Tutorial 5
– Create baseplate connection manually
– Trim/extend column shaft with fitting
– Use beam and contour plate tools (baseplate & stiffeners)
– Model holes manually
– Welding
– Create custom component
– Bolt parts tool
– Polygon cut for notching and penetrations
– Manual beam bolting
Tutorial 6
– Create GA drawings (marking plans)
– 3D perspective drawings
– HD bolt plans
– Floor, roof & purlin plans
– Elevations
– Drawing editing tools
Tutorial 7
– Engineering-style GA drawing setup
– Object level settings and section arrows
– View label customisation
– Add 2D CAD details and library symbols
– Custom level marks and grid labels
– Design group numbering
– Pad footings
– Concrete slabs
– Create new model
– Create grids
– Create model views
– Point creation
– Model footings
– Model columns
– Model beams
– Member offset and rotations
– Add baseplate, endplate, shear plate connections
– Copying members
Tutorial 2
– Set out and connect portal frame
– Model wall bracing
– Work with workplanes
– Create true plan views
– Model roof bracing
– Add bracing connections
– Model purlins
– Add purlin connections
– Add bridging
Tutorial 3
– Work across multiple 3D views
– Model holes manually
– Use contour plate tool (hopper walls)
– Use beam tool (hopper flange)
– Welding
Tutorial 4
– Construct angled points for stair setout
– Model PFC stair stringers and toeing direction
– Mitre joints
– Line Cut and Fitting tools
– Folded plate tread using Polybeam
– Polybeam corner chamfers
Tutorial 5
– Create baseplate connection manually
– Trim/extend column shaft with fitting
– Use beam and contour plate tools (baseplate & stiffeners)
– Model holes manually
– Welding
– Create custom component
– Bolt parts tool
– Polygon cut for notching and penetrations
– Manual beam bolting
Tutorial 6
– Create GA drawings (marking plans)
– 3D perspective drawings
– HD bolt plans
– Floor, roof & purlin plans
– Elevations
– Drawing editing tools
Tutorial 7
– Engineering-style GA drawing setup
– Object level settings and section arrows
– View label customisation
– Add 2D CAD details and library symbols
– Custom level marks and grid labels
– Design group numbering
– Pad footings
– Concrete slabs
Tekla Structures for Steel Detailers
Full Course (Aus)
26 Weeks of Course Access
SAVE 50%
$1,700
Tutorial 1
– Create new model
– Create grids
– Create model views
– Point creation
– Model footings
– Model columns
– Model beams
– Member offset and rotations
– Add baseplate, endplate, shear plate connections
– Copying members
Tutorial 2
– Set out and connect portal frame
– Model wall bracing
– Work with workplanes
– Create true plan views
– Model roof bracing
– Add bracing connections
– Model purlins
– Add purlin connections
– Add bridging
Tutorial 3
– 3D modelling techniques across multiple views
– Model holes manually
– Contour plate tool (hopper walls)
– Beam tool (hopper flange)
– Welding
Tutorial 4
– Construct angled points for stair setout
– Model PFC stair stringers and toeing direction
– Mitre joints
– Line Cut and Fitting tools
– Folded plate tread using Polybeam
– Polybeam corner chamfers
Tutorial 5
– Create baseplate connection manually
– Trim/extend column shaft with fitting
– Beam and contour plate tools (baseplate and stiffeners)
– Model holes manually
– Welding
– Create custom component
– Bolt Parts tool
– Polygon cut for notching and penetrations
– Manual beam bolting
Tutorial 6
– Model pipe truss
– Construct angled points for truss setout
– Use Endplate 144 connection with pipe
– Use Round Tube 23 for pipe-to-pipe cuts
– Add splices with split tool
– Splice plate component
– Create wrap-around drawings of notched pipe
Tutorial 7
– Apply learnings to full project
– Project setup: bolt grades, part/assembly prefixes
– Set out hip roof and jack rafters
– Create hip and custom apex connections
– Fitting 13 for trimming truss members
– Column/mullion under rafter connections
– Model numbering and checking
– Clash checking
– Run reports
– Model view representations
Tutorial 8
– Create GA drawings (marking plans)
– 3D perspective views
– HD bolt, floor, roof, purlin plans
– Elevations
– Assembly & single part drawings
– Drawing Wizards
– Drawing editing tools
Tutorial 9
– Manage drawings and revisions
– Revise model using checklist
– Re-numbering after changes
– Track changed marks
– Understand Tekla’s drawing flags
– Update and annotate revised drawings
– Use “Ready for Issuing” and “Issued” flags
– Check for new drawings
– Print drawings
– Create new model
– Create grids
– Create model views
– Point creation
– Model footings
– Model columns
– Model beams
– Member offset and rotations
– Add baseplate, endplate, shear plate connections
– Copying members
Tutorial 2
– Set out and connect portal frame
– Model wall bracing
– Work with workplanes
– Create true plan views
– Model roof bracing
– Add bracing connections
– Model purlins
– Add purlin connections
– Add bridging
Tutorial 3
– 3D modelling techniques across multiple views
– Model holes manually
– Contour plate tool (hopper walls)
– Beam tool (hopper flange)
– Welding
Tutorial 4
– Construct angled points for stair setout
– Model PFC stair stringers and toeing direction
– Mitre joints
– Line Cut and Fitting tools
– Folded plate tread using Polybeam
– Polybeam corner chamfers
Tutorial 5
– Create baseplate connection manually
– Trim/extend column shaft with fitting
– Beam and contour plate tools (baseplate and stiffeners)
– Model holes manually
– Welding
– Create custom component
– Bolt Parts tool
– Polygon cut for notching and penetrations
– Manual beam bolting
Tutorial 6
– Model pipe truss
– Construct angled points for truss setout
– Use Endplate 144 connection with pipe
– Use Round Tube 23 for pipe-to-pipe cuts
– Add splices with split tool
– Splice plate component
– Create wrap-around drawings of notched pipe
Tutorial 7
– Apply learnings to full project
– Project setup: bolt grades, part/assembly prefixes
– Set out hip roof and jack rafters
– Create hip and custom apex connections
– Fitting 13 for trimming truss members
– Column/mullion under rafter connections
– Model numbering and checking
– Clash checking
– Run reports
– Model view representations
Tutorial 8
– Create GA drawings (marking plans)
– 3D perspective views
– HD bolt, floor, roof, purlin plans
– Elevations
– Assembly & single part drawings
– Drawing Wizards
– Drawing editing tools
Tutorial 9
– Manage drawings and revisions
– Revise model using checklist
– Re-numbering after changes
– Track changed marks
– Understand Tekla’s drawing flags
– Update and annotate revised drawings
– Use “Ready for Issuing” and “Issued” flags
– Check for new drawings
– Print drawings
Advanced Features
What Can Be Achieved with Tekla?
- Accurate, Information-Rich 3D Modelling:
Create highly detailed, constructible models that represent real-world construction, integrating materials like steel, concrete, and timber. - Efficient Workflow and Collaboration:
Automate drawing production, detect clashes early, and streamline coordination across disciplines using open BIM standards and connected Trimble tools. - Enhanced Project Planning:
Improve project outcomes with 4D planning and scheduling, visualising construction sequencing for better site coordination and change management.
Want to chat to us? Get in touch and we’ll be happy to help.
CALL 1800 900 272
Model with Confidence – For Structural Engineers and Detailers
Create constructible 3D models that reflect reality.
Structural engineers and detailers can rely on Tekla to produce precise, information-rich models that go far beyond design intent. Whether you’re working in steel, concrete, or mixed materials, Tekla ensures every component is buildable, minimising rework and improving accuracy from the start.
Automate Your Drawings – For Drafting and Fabrication Teams
Speed up documentation with model-based outputs.
Collaborate Without Boundaries – For Project Managers and BIM Coordinators
Work better together with a connected workflow.
Tekla brings all project stakeholders into one connected environment. Project managers and BIM coordinators can share models in real time, manage changes across disciplines, and maintain visibility from design through to site, ensuring teams stay aligned and informed.
Build Smarter with 4D Planning – For Contractors and Site Teams
Visualise construction sequencing and stay ahead.
“Trimble Ri and Connect AR have revolutionised our approach to site setout and collaboration. By seamlessly integrating with Trimble Connect, we ensure precise execution and real-time data access across our teams.
These tools have enhanced efficiency, reduced errors, and helped us deliver high-quality, sustainable projects on schedule.
“
Placie Holder
Apollo Property Group
Get More Information
For full details on the right Tekla licence for your needs, just share your contact details and we’ll provide a personalised quote with up-to-date, detailed pricing.